The Ender 3 V2 LCD is currently limited by its closed source firmware. You can remove the stock LCD and replace it with the Creality OEM LCD and a printed part.
Once the LCD is swapped you just flash the printer as an Ender 3, not an Ender 3 V2. This works with the Creality V4.2.X, SKR E3 Mini, and EZBoard boards when using our firmware.
LCD Screen: Creality 12864 OEM LCD Screen – CR-10/Ender 3/Ender 3 V2/Ender 5/+More – Cables Included – TH3D Studio LLC
Creality OEM ABS/PLA/Metal Brackets: Creality 12864 LCD Mounting Bracket – TH3D Studio LLC
Printed LCD Screen Mount: Ender 3 OEM LCD Bracket Printable Version – STL Download – TH3D Studio LLC
Once the LCD is swapped you can put our EZBoard in there and just flash it with our Ender 3 firmware setting.
If you swap the board and are using our EZBoard with our EZABL with the Ender 3 V2 OEM EZABL mount offsets are:
#define NOZZLE_TO_PROBE_OFFSET { -48, -15, 0 }
These would get entered in the CUSTOM_PROBE section and you would also uncomment (or enable in the web config if you are using that to build the firmware) the CUSTOM_PROBE option.
We convert ours here at timestamp 13:00