These are the temperatures that we found our filaments print best at.
Printing ASA/ABS – When printing ASA/ABS you must use an enclosure to prevent warping and layers de-laminating. We sell enclosures in our shop here.
Prints not sticking? – For all materials we highly recommend Bed Cement to stick your prints down if you are having issues with adhesion.
Abrasive Filaments – If you are printing Carbon Fiber, Glass filled, and/or Glow in the Dark we highly recommend using a nozzle that is rated for abrasive filaments. We carry steel and our EZFlow nozzles for many machines that are up to the task to print these harsher filaments.
