On some machines, you may need or want to mount the strip at different angles and/or positions. As we fit the strips to different models we will add more mounts that we made. If you also have made a mount for the EZNeo PCB let us know and we’ll add it here.
On printers that are “Ender 3 style” the strips are designed to be mounted directly to the bottom of the top extrusion bar. Some printers have mechanical parts in the way on CoreXY frames or square frames so these adapters are to help you install the strips on those different style printers.
We’ve also added a diffuser to make the light softer so if they face a camera there is no more glare. We recommend printing it in a clear filament (like our Frost ABS).
This is designed to be installed in the top bar of the SV06 in the 3rd hole from each side as shown below. Then screw the EZNeo strip to the blocks with their included screws. The direction of the holes in the plugs must match as shown below for proper mounting.
The V2 file adds 2 more holes towards the edge of the part. When you install it use the holes that are closest to the same edge of the top of the printer support bar on each plug. There are 2 holes so you can use the same plug for each side. Since they are offset, this requires 2 holes – one for left and right. The light strip will be straight when you screw it on to the plugs if you installed it correctly.
This was designed for the Ender 6 to mount under the front rail. Each EZNeo kit includes 4x M3x6mm screws and 4x M3 T-Nuts. This is designed to mount with 2x M3x6mm screws from the PCB to the blocks and 2x M3x6mm Screws through the blocks with 2x M3 T-Nuts to attach them to standard 20mm extrusion. This also fits well on the Ender 5 and 5 Plus.
